In the YELLOW DWARF sortiment, you will find small-series products of 3d print, etchings and decals.

Working with our products is very simple and you will need basic modeling tools like:
  •   - Modeling Knife / Scalpel
  •   - Modelers Side Cutter
  •   - Sanding Sticks
  •   - Tweezer

We glue more complex kits with instant glue according to the instructions before or after painting.

Some products need to be first cut of supports. Be careful because the resin is brittle.

Then remove the remaining roughness or irregularities with a knife or sanding stick. Finally, wash the products in lukewarm water.

Basically any model paints can be used for coloring. Over the years of modeling, I have come up to a combination of Humbrol (synthetics) and Vallejo (acrylic) colors. Apply the paint with an airbrush or brush. You can take your model to the next level with some weathering techniques like wash, dry brush, pigments, oils or pastels.

Some YELLOW DWARF models also include decals, either classic or inverted. The procedure with them is the same as with other kits. For a better result, it is possible to apply decal waters and finally fix the decals with varnish.

As you can see, it's not a big deal. Nevertheless, if you have any questions, do not hesitate to contact us by e-mail or on social networks.